Tekno R/C - Rear Hubs and Bearing Spacers (+/-2mm, adj roll Center, L/R, EB/NB48 2.1)

Improve the handling of your Tekno RC EB/NB48 2.X vehicles with these +/-2mm rear hubs! Their drivers discovered that the -2mm position (closest hole to the bearing) increased rear end grip, stability, and predictability on all track conditions during testing. Although these hubs include an optional high roll center setting (hinge pin further away from the bearing), it was rarely used during testing.

Compatibility
These hubs are only compatible with Tekno RC's 2.X buggies and should not be used with ET or NT truggies. TKR9284B rear arms are required.

Recommended to use with:
TKR9017B - Sway Bar and Bulkhead Acc (for -2mm bulkheads)
TKR9416B - Gearbox (-2mm, F/R, EB/NB/ET/NT48 2.x)
TKR9284B - Suspension Arms (revised, rear, EB/NB48 2.1)